Proper tire pressure is extremely important in the daily operation of the car. It also affects the efficiency of the machine and the comfort of its driving, and also determines the service life of the tire itself. The same is with tires used in agricultural machinery. We advise you what to remember when choosing pressure for agricultural tires to ensure their optimal work. Giving the installation working pressure
A common error when choosing pressure in tires is a designation that shows the tire section and the maximum pressure value. In fact, this is the assembly pressure. After installing the tire on the rim, it should be pumped up to the value indicated on this marking, so that the agricultural tire can properly sit on board. When this happens, you can set the correct working pressure, i.e. The optimal pressure in which the tire can work. How to choose the right working pressure?
The safest solution is the use of nominal pressure, i.e. maximum working pressure indicated by the manufacturer in the technical catalog of tires. However, if we still have a power supply at this pressure, we can lower it. Determine the load on the tires in advance. How to do this? To determine the load on the tires, we must weigh both axes. When weighing the front axis, the tractor should be with hinged equipment or with a load on the front axle and without load on the rear axle. When weighing the rear bridge, the tractor should be with all the hinged devices. We divide the result of the measurements by two, then determine the maximum speed with which the tractor moves, check the size, brand and model of the tire. Then select the appropriate pressure from the table of the values provided by the manufacturer. It is worth remembering that with intensive operation of roads or working on slopes, the tire pressure should be approximately 0.4 bar above the value indicated in the table. We also do not forget to regularly check the tire pressure to maintain it at the right level. Why is the tire pressure so important?
The choice of optimal pressure in agricultural tires is very important in the daily operation of the tractor. If the pressure is selected correctly, this will affect the increase in the performance of the machine and increase the durability of the tires. Both too high and too low pressure will worsen driving conditions. With too low pressure, the risk of irreversible damage to the tires is high as a result of their overload, and with too high the traction power of the tractor decreases, fuel consumption increases, the soil is compacted, and the general comfort of the work is reduced. Where to buy Viagra Super Active online no prescription?
